WHY SHOULD I READ THIS? I CAN'T CODE!
Well, the sad fact is that, neither can I! :) I am just a stubborn geezer!
And look at me now... 500+ uploads to http://os4depot.net compiling
multiplatform stuff for AmigaOS 4.0 isn't THAT hard, c'mon! If I can do it,
you can do it too! You'll jump up and down screaming when you manage to
compile your first SDL app, I did! To my defence I have to say that I had
to figure out a lot of the process the hard way! :P
*** HOT NEWS! BLAZING FAST PORTING WITH THE NEW SCRIPTS + ALIASES! ***
Spot's Porting for Dummies Quick Help
Commands
csdl Configure a SDL project for newlib.
csdlnolib Configure a SDL project for newlib, no libs. (If the above fails).
clibrary Configure a library.
colibrary Configure a library, with an old incompatible configure script.
msdlg++ Compile all .cpp files in the current dir for (SDL).
lsdlg++ Link all .o files in the current dir (SDL).
msdlgcc Compile all .c files in the current dir for (SDL).
lsdlgcc Link all .o files in the current dir (SDL).
maleg++ Compile all .cpp files in the current dir (Allegro).
malegcc Compile all .cpp files in the current dir (Allegro).
laleg++ Link all C++ .o files in the current dir (Allegro).
lalegcc Link all C .o files in the current dir (Allegro).
dummy Prints Spot's Porting for Dummies
dummyhelp Prints this help
sdllibs Prints the correct order of the SDL linklibs.
sdlpaths Prints the SDL paths.
HISTORY
=======
Version 2.4
Switched to Amiga version strings to make it compatible with AU.
Version 2.1.3
Added SPFD to AmiUpdate.
Added an installer script.
Added help scripts and shell/abc-shell aliases for rapid porting.
Type DUMMYHELP and DUMMY in shell for help on usage!
HUGE THANX GO OUT TO CHRIS AND RIGO FOR MAKING THE INSTALLER AND
ASSOCIATED APPS TO MAKE THIS DELUXE EDITION POSSIBLE!
Version 2.1.2
Added a new chapter written by Blacky/Stardust, on how Endianess works.
Some cosmetic changes.
Version 2.1.1
Corrected a common error
Version 2.0
Further fixes.
Release!
Version 1.9.13
Clean up's. Preparing for release.
Version 1.9.13
Clean up's. Preparing for release.
Version 1.9.12
Added a common error.
Version 1.9.11
Added a common error.
Version 1.9.10
Added a common error.
Version 1.9.9
Added some common errors.
Various small changes.
Version 1.9.8
Added a common error.
Version 1.9.7
Added a new chapter: Cross Compile Configures
Added a new chapter: LValue Problems
Added a new chapter: Linking problems
Added more common errors.
Version 1.9.6
Blacky / Stardust proof read the guide and added some additional
comments. Mega thanx!
Version 1.9.5
Added a common error on how to fix stuttering audio.
Added some better define examples.
Added some more info to the crash on exit fixing part.
Added a new chapter 'Adding a library check'
Version 1.9.4
Turned it into an AmigaGuide document.
Removed the chapter about amiupdate, as it's available on the
AmiUpdate page anyway. Less is more!
Version 1.9.3
General clean up. Getting ready for release!
Version 1.9.2
Reorganised the guide a little.
Added icons by Mason.
Added shell scripts to make porting faster, and easier.
Added an installer script.
Added AmiUpdate supprt.
Added two new errors.
Removed the Quick Reference, as there are shell scripts for these now.
Removed clib2 from the guide, as it was bloating it, once you know how
to handle newlib, clib2 will be easy to use if you need it.
Version 1.9.2
Added a common error.
Version 1.9.1
Added a common error.
Version 1.9.0
Nuked Clib2 from the quick reference guide as it's not updated as frequently
as newlib and it lacks support for shared objects.
Added MiniGL and dynamic linklib info to the quick reference section.
Removed the --enable-shared, -shared, -use-dynld and -fpic flags,
if your SDK is too old to handle shared objects.
Added a sollution that works for some ports that crashes on exit. Thanx
Varthall!
Added a new tip on how to strip dynamically linked exe's, thanx xeron.
Version 1.8.9
Added a common error
Version 1.8.8
Added some common errors
Version 1.8.8
Added a not so common error
Version 1.8.7
Added a not so common error
Version 1.8.6
Added a new chapter, How to add music to your SDL app.
Thanx to Slut Nancy / bAH for submitting this chapter.
Version 1.8.5
Added three new common errors.
Cleaned up the essential tools chapter.
Version 1.8.4
Added GREP, YACC and AWK to the essential tools section.
Version 1.8.3
Added three common errors
Version 1.8.3
Added a not so common error
Version 1.8.2
Added a common configure error/solution.
Version 1.8.1
Added a section on how to make small executeables to 'Tips & Trix'
Added a section on how to set a minimum stack cookie to your executeables to
'Tips & Trix'
Thanx to Joerg for these tips. Much appreciated.
Version 1.8.0
Minor tweaks to the clib2 configure lines.
Version 1.7.9
Removed __USE_INLINE__ from the configure lines, as they ain't used very
much when porting, and could cause problems when configuring sometimes.
Minor tweaks.
Version 1.7.8
Added a new common error.
Version 1.7.7
Added a new common error.
Version 1.7.6
Added a new not so common error, thanx to Zerohero for the help with the
solution!
Version 1.7.5
Added a new (advanced) chapter written by Rigo, on how to deal with
AmiUpdate.
Thanx for letting me use it Rigo!
Version 1.7.4
Minor tweaks to the configure lines.
Version 1.7.3
Added a new error and a solution submitted by Blacky_Stardust. Thanx a lot
man!
Version 1.7.2
Added a tip on how to add AmigaOS version strings to your exes to the tips
and tricks chapter.
Version 1.7.1
Added configure lines finetuned for SDL projects to the quick reference
section.
Thid should help newbies get rid of linking errors and save me from wasting
time on makefile editing.
Dunno why I didn't do this before.
Cleaned up the Quick Reference guide, I hope it is much clearer now.
Version 1.7.0
Added -ltiff to the CFLAGS, as my latest compile of SDL_Image needs and
supports it.
Version 1.6.9
Added a new common error to chapter 07.
Version 1.6.8
Added some URL's to the 'What to Port' chapter.
Version 1.6.7
Added a really weird 'not so common error' that costed me some hair! Grrr!
Version 1.6.6
Added a new subchapter 'Newlib or Clib2?'
Added some clarifications to the quick references. Thanx to Lio for the
feedback!
Added some new stuff to 'Tips and Tricks'
Added a 'not so common error'
Version 1.6.5
Added a new 'not so common error'
Version 1.6.4
Added a new chapter 'Compiling SDL/GL apps'
Added a new tip to the 'Common errors that can occur when configuring'
chapter.
Version 1.6.3
Added a new chapter: 'Converting a Windows makefile into an AmigaOS makefile'
Version 1.6.2
Extended the common error section with a small guide on how to find
out what header is missing.
Version 1.6.1
Misc small changes and additional info 'backported' from the AROS 'port'
of this guide.
Version 1.6.0
Added a guide on how to make GUI's using Emperor.
Added lots of small things that I can't remember.
Version 1.5.3
Added a tip on Fullscreen modes in SDL apps/games. Thanks Lio.
Added some quick references related to Allegro compiling. Woooot? Already? ;)
Version 1.5.2
Corrected some small things related to SDL_Mixer
Version 1.5.1
Added SVN to tips and tricks
Version 1.5
Fixed a typo. I had writen -lpng -lpng, when it should be -lpng -ljpeg.
Thanx to Raziel for the report.
Added a new chapter: History
Added a new chapter: Getting your SDK up to date
Added a new chapter: The basics
Added a new chapter: Configuring linklibs
Added a new chapter: Quick Reference
Added more common errors
Defines section updated
Common errors section updated
Corrections to the configure lines. Thanx HNL!
Corrections to the example makefile. Thanx Booger!
A lot of small changes that I can't remember.
Corrected the cygnix config line.
| |
